Cleaning your motorcycle windshield is important to keep it clean and clear of debris and dirt. In this article, we’ll go over some cleaning tips and rules for your motorcycle windshield. After reading this, make sure to keep your motorcycle windshield clean and clear for optimum visibility!
How to clean the motorcycle windshield
Source: motorcyclescreens.eu
Motorcycle windshields can be treated similarly to car windshields when it comes to cleaning. The most important thing is to make sure the cleaning agent you choose is safe for the surface and the glass.
Cleaners can be purchased at most automotive supply stores, and are also available online on sites like motorcyclescreens.eu. In general, there are three types of cleaners: solvents, detergents, and abrasives. Here are some tips on using each type:
Solvent-based cleaners use a solvent such as acetone or methylene chloride to dissolve the dirt and grease on the glass. Be careful not to damage the paintwork or glass with these cleaners; use a cloth or a piece of paper to apply the cleaner. Let the cleaner work for a few minutes before wiping off the surface with a dry cloth. Never use petroleum-based products on your motorcycle windshield!
Detergent-based cleaners are made from ingredients such as soap and water. These cleaners work well on both hard and soft surfaces but must be rinsed off quickly with fresh water to prevent streaking. Avoid using these cleaners on painted surfaces or on windows that have been treated with an opaque sealant spray.
Abrasives-based cleaners are made from abrasive materials such as sand or grit. These cleaners work well on hard surfaces but can damage the paintwork and glass if used incorrectly. Apply the cleaner using a soft cloth, and be sure to rinse off the surface completely before proceeding.
Precautions Before Cleaning Your Windshield
Before cleaning your motorcycle windshield, there are a few precautions you should take to ensure the job is done properly and without any harmful effects. First, never use a pressure washer or any other harsh chemicals on your windshield; these could damage the surface. Second, be sure to use a mild solution of soap and water to clean the glass. And finally, always dry the windshield thoroughly before applying any sealant or wax.
Rules for cleaning a motorcycle windshield
Source: redhillmotorcyclewerx.com
Cleaning a motorcycle windshield can be a daunting task, but with a few simple rules in mind, it can be easily done. Here are six tips to help you get started:
- Always use a clean cloth or dryer sheet when cleaning your motorcycle windshield. This will help to prevent streaking and smudging.
- Never use just water when cleaning your shield – this will cause the paint to bead up and become scratched. Instead, use a mixture of window cleaner and water, or an automotive glass cleaner. Be careful not to use too much liquid, as this can cause damage to the surface.
- Make sure that you clean the lower portion of your motorcycle windshield as well as the top – this is where rain and snow can accumulate. Also, keep in mind that sun glare can cause problems while driving, so make sure to clean the area directly in front of you as well.
- Don’t forget the edges of your motorcycle windshield – these areas tend to accumulate dirt and debris more than other parts of the glass. Clean them using a damp cloth or sponge.
- When finished cleaning, take care to dry it off completely. This will help to prevent water spots and streaks.
- Don’t clean the shield in direct sun. For the best results, leave your motorcycle in a shady area and wash it in the shade. Direct sunlight can soften the polycarbonate plastic and actually bake some of the cleaner into the surface. This extends the life of your windshield, reducing your need to clean it more often.
How to polish a motorcycle windscreen
Polishing a motorcycle windscreen is a great way to keep it clean and looking its best. By following these simple steps, you can make your windscreen sparkle like new.
- Start by cleaning the windscreen with a cloth and water. Make sure to get all the dirt and dust off of it.
- Once the windscreen is clean, apply a protective polish to the surface. Choose a polish that is specifically designed for windscreens, or use a household polish if you have one available.
- Apply pressure to the polish with a cloth while rubbing it in small circles on the windscreen. Be sure to work evenly across the entire surface.
- Let the polish dry completely before using the bike again.
How about hiring a professional?
Source: powersportsguide.com
Keeping your windshield can sometimes require a professional (or you just feel lazy and want to leave that job for someone else). A professional motorcycle windshield cleaner can remove all the dirt, grime, and salt deposits without damaging the glass. Here’s how to choose the right one:
- Talk to friends and family who own motorcycles or regularly ride them. Ask them who they use to clean their windshields, and what their experience was. If they’re happy with their choice, you may be too.
- Check out online reviews of motorcycle cleaners. Review sites like Yelp offer accurate information about businesses, so be sure to read reviews before making your decision.
- Consider what kind of cleaning you need to be done. Some motorcycle windshield cleaners specialize in removing dirt, bugs, and grease; others are more focused on cleaning the glass itself.
- Consider price and availability. Price is usually a good indicator of quality; high-end window washers may charge more, but their work is usually worth it. And don’t forget to factor in availability; if a professional cleaner is not available when you need it, consider using a less-expensive option.
Wrapping up
If you’re like most riders, your motorcycle windshield is one of your favorite places to be. Cleaning it shouldn’t be a chore, but it’s important to follow some basic rules to keep it looking its best. Make sure to read through this guide before getting started so that you know what tools and techniques work best for cleaning your motorcycle windshield!
